SCOPUS Citation Analysis

Asean Journal on Science and Technolgy for Development (AJSTD) is cited at least 47 times at Scopus database.
Update September 11, 2017.| First published in 2002


 

  1. Reddy, A.N.R., Saleh, A.A., Islam, M.D.S., Hamdan, S. 2015 Methanolysis of Crude Jatropha oil using heterogeneous catalyst fromthe seashells and eggshells as green biodiesel. ASEAN Journal On Science and Technology for Development 32(1), pp. 16-30

Reddy, A.N.R.Saleh, A.A.Islam, M.S.Hamdan, S.2017. Active Razor Shell CaO Catalyst Synthesis for Jatropha Methyl Ester Production via Optimized Two-Step Transesterification. Journal of ChemistryArticle number 1489218

  1. Aung, N.Z., Yuwono, T.Y. 2012. Evaluation of mixture viscosity models in the prediction of two-phase flow pressure drop. ASEAN Journal on Science and Technology for Development 29(2), pp. 2012

Okunev, M.V.Aleshkin, A.S., 2016 Molodykh, P.V. Analysis of methods of multi-stage hydraulic fracturing efficiency assessment at horizontal wells. 7th EAGE Saint Petersburg International Conference and Exhibition: Understanding the Harmony of the Earth's Resources Through Integration of Geosciences

  1. Mulijani, S., Budianto, E., Hikam, M.2010. Formation and Characterization of Asymetric Nanofiltration Membrane: Effect of Temperature and Surfactant as a Template. ASEAN Journal on Science & Technology For Development 27, pp. 21-29

Mohd Ali, N.S.Hassan, A.R.2016. The effect of CTAB and SDS surfactant on the morphology and performance of low pressure active reverse osmosis membrane | [Kesan surfaktan CTAB dan SDS terhadap morfologi dan prestasi membran osmosis berbalik aktif bertekanan rendah].Malaysian Journal of Analytical SciencesVolume 20, Issue 3, 2016, Pages 510-516

  1. Pin, T.Y., Chin, L.S., Hin, L.S., Lim, L.B.2010. Presumptive testing of amphetamine-type stimulants via color tests. ASEAN Journal for Science and Technology Development 27, pp. 66-75

Choodum, A.NicDaeid, N.2016. Quantitative Colorimetric Assays for. Methamphetamine ( Book Chapter). Neuropathology of Drug Addictions and Substance Misuse. Volume 2, 15 April 2016, Pages 349-359

  1. Malik, A.Q., Ming, L.C., Sheng, T.K., Blundell, M.2009. Influence of temperature on the performance of photovoltaic polycrystalline silicon module in the Bruneian climate. ASEAN Journal on Science and Technology for Development 26(2), pp. 63-74

Malik, A.Q. DocumentAssessment of the potential of renewables for Brunei Darussalam. Renewable and Sustainable Energy ReviewsVolume 15, Issue 1, January 2011, Pages 427-437

  1. Riyanto Othman, M.R., Salimon, J.2008. Synthesis of acetic acid from ethanol by electroxidation technique using Ni-Cu-PVC electrode. ASEAN Journal for Science and Technology Development 25, pp. 363-371

Hamdan, M.S.Nordin, N.Amir, S.F.M.Othman, M.R.Riyanto. Electrochemical behaviour of Ni and Ni-PVC electrodes for the electroxidation of ethanol. Sains MalaysianaVolume 40, Issue 12, December 2011, Pages 1421-1427

  1. Hoa, D.T., Man, T.D., Hau, N.G.2008. Pretreatment of lignocellulosic biomass for enzymatic hydrolysis. ASEAN Journal on Science and Technology for Development 25, pp. 341-346

Na, C.-I.Fedenko, J.R.Sollenberger, L.E.Erickson, J.E.2016. Harvest management affects biomass composition responses of C4 perennial bioenergy grasses in the humid subtropical USA.GCB Bioenergy.Volume 8, Issue 6, 1 November 2016, Pages 1150-1161

  1. Thao, D.T., Huan, L.Q., Hieu, D.K., Chien, N.Q., Hung, N.V.2008. Aromatase inhibitory and cytotoxic activities of chemical constitutuents from the Vietnamese medicinal plant Ban-chi-lien (Scutellaria barbata D. Don. The ASEAN Journal on Science and Technology for Development 25, pp. 481-487

Thao, D.T.Huang, C.-Y.Lin, K.-T., (...), Nam, N.H.Van Minh, C.2015. Using the Gene Expression Signature of Scutebarbalactone VN Isolated from Scutellaria barbata to Elucidate its Anticancer Activities. Natural Product CommunicationsVolume 10, Issue 2, 2015, Pages 353-355

  1. Chore, H.S., Ingle, R.K.2008. Soil-structure interaction analyses of pile supported building frame. ASEAN Journal on Science and Technology for Development 25(2), pp. 457-467

Anugna Sai, G.Jitendra Babu, N.2017. DocumentEffect of soil interaction on 3×3 building frame embedded in multilayered soil. International Journal of Civil Engineering and TechnologyVolume 8, Issue 1, January 2017, Article number IJCIET-08-01-078, Pages 670-675

  1. Pasricha M.S., Hashim F.M. 2006. Effect of the reciprocating mass of slider crank mechanism on torsional vibrations of diesel engine systems. Asean Journal on Science and Technology for Development, 23 (1) , pp. 71-81

Öztürk, E.Karabulut, H. 2012. Dynamic and vibration analysis of a single cylinder diesel engine | [Tek silindirli bir dizel motorunun dinamik ve titreşim analizleri]. Journal of the Faculty of Engineering and Architecture of Gazi University. 27 (3), pp. 491-500.

Karabulut, H.Öztürk, E.Çinar, C. 2011. Dynamic modeling and investigation of vibrations of a single cylinder four-stroke diesel engine | [Tek si̇li̇ndi̇rli̇ dört zamanli bi̇r di̇zel motorunun di̇nami̇k modeli̇ ve ti̇treşi̇mleri̇ ni̇n i̇ncelenmesi̇]. Journal of the Faculty of Engineering and Architecture of Gazi University. 26(1), p. 173-183.

  1. Malik, A.Q., Hah, C.C., Khwang, C.S., Ming, L.C. 2006. Characterisation of Multicrystalline Solar Cells. ASEAN Journal Science and Technology Development (AJSTD), 23(1-2), pp. 97-106.

Jeevandoss, C.R.Kumaravel, M.Kumar, V.J. 2011. Sunlight based I-V characterization of solar PV cells. Conference Record - IEEE Instrumentation and Measurement Technology Conference 5944061. Pp.1593-1596.

  1. Heng, L.Y., Hall, E.A. 2006. Characteristics of Solid-State Calcium Ion Sensors Based on Photocurableand Selfplasticising Polyacrylate Matrices. ASEAN Journal on Science and Technology for Development, 23, pp. 261-273.

Said, N.R.Rezayi, M.Narimani, L., (...), Manan, N.S.A.Alias, Y. 2016. A New N-Heterocyclic Carbene Ionophore in Plasticizer-free Polypyrrole Membrane for Determining Ag+ in Tap Water. Electrochimica Acta. 197, pp. 10-22.

  1. Ahmad, I.I., Abu Bakar, D.R., Mokhilas, S.N., Ramli, A. 2005. Recycled PET for Rice Husk/Polyester Composites. ASEAN Journal for Science and Technology Development 22(4), pp. 345-353

Chanda, A.K.Neogi, S.Neogi, S. 2013. Optimization of Plasma Treatment for Enhanced Filler Matrix Adhesion in Manufacturing Green Composites with Rice Husk. Indian Chemical Engineer. 55 (3), pp. 177-188.

Ofem, M.I.Umar, M. 2012. Effect of filler content on the mechanical properties of periwinkle shell reinforced CNSL resin composites. ARPN Journal of Engineering and Applied Sciences. 7 (2), pp. 213-215.

Rust, D.A. 2008. Opportunities & development of bio-based materials for SMC (sheet molding compound). SPE Automotive and Composites Division - 8th Annual Automotive Composites Conference and Exhibition, ACCE 2008 - The Road to Lightweight Performance. 1, pp.387-392.

  1. Kajitvichyanukul, P., Changul, C. 2005. Photocatalytic Removal of Triand Hexa-Valent Chromium Ions from Chrome-Electroplating Wastewater. ASEAN Journal Science and Technology Development, 22, pp. 355-363.

Nico, P.S.Kumfer, B.M.Kennedy, I.M.Anastasio, C. 2009. Redox dynamics of mixed metal (mn, cr, and fe) ultrafine particles. Aerosol Science and Technology.

  1. Sabularse, V.C., Tud, M.T., Lacsamana, M.S., Solivas, J.L. 2005. Black and white lahar as inorganic support for the immobilization of yeast invertase. ASEAN Journal on Science and Technology for Development. 22, pp. 331-344.

 

Andjelković, U.Milutinović-Nikolić, A.Jović-Jovičić, N., (...), Vujčić, Z.Jovanović, D. 2015. Efficient stabilization of Saccharomyces cerevisiae external invertase by immobilisation on modified beidellite nanoclays. Food Chemistry. 168, pp. 262-269.

Singh, R.K.Tiwari, M.K.Singh, R.Lee, J.-K. 2013. From protein engineering to immobilization: Promising strategies for the upgrade of industrial enzymes. International Journal of Molecular Sciences. 14 (1), pp. 1232-1277.

Kotwal, S.M.Shankar, V. 2009. Immobilized invertase. Biotechnology Advances. 27 (4), pp. 311-322.

  1. Kulworawanichpong, T., Puangdownreong, D., Sujitjorn, S. 2004. Finite convergence of adaptive Tabu search. ASEAN Journal on Science and Technology for Development 21(2-3), pp. 103-115.

Udomsuk, S.Areerak, K.Areerak, K. 2016. The energy saving for separately excited DC motor drive via model based . Journal of Electrical Engineering and Technology. 11 (2), pp.470-479.

Tiyarachakun, S.Areerak, K.Areerak, K. 2014. Instantaneous power theory with fourier and optimal predictive controller design for shunt active power filter. Modelling and Simulation in Engineering. 2014, 381760.

  1. Saeid, N.H. 2003. Improved method for modeling eddy viscosity and dissipation near the wall of boundary layer with pressure gradients. ASEAN Journal on Science & Technology for Development 20(2), pp. 163-176.

Saeid, N.H.Yunus, E.Fei, O.C. 2014. CFD simulation of air flow around a hovercraft. IET Conference Publications. 2014 (CP649).

 

  1. Khalid, Y.A. 2003. Bending strength of corrugated web beams. ASEAN Journal on Science Technology for Development 20(2), pp. 177-186.

Wahab, N.A.Hamid, H.A.Ibrahim, A. 2013. Shear capacity of profiled web girders with intermediate rolled-in stiffeners. BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium. 6560135, pp. 296-300.

Hadli, A.H.M.Hanizah, A.H.Azmi, I. 2006. Nonlinear shear behaviour of welded girder with profiled web using LUSAS. Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010. Pp. 59-64.

  1. Yusuf, N.A., Musa, A. 2003. Chitosan Membrane and Sol-gel Film Doped with pH Indicators. ASEAN Journal of Science and Technology for Development 20(2), pp. 135-147.

Mohammad, R.Ahmad, M.Daud, J.M. 2009. Development of optical ph sensor based on curcumin reagent immobilized in sol-gel/chitosan melamine hybrid matrices | [Pembangunan sensor optik ph berasaskan reagen kurkumin terpegun dalam matriks hibrid sol-gel/kitosan melamin]. Sains Malaysiana

  1. Wong, F., Ahmad, M., Heng, L.Y. 2003. The use of artificial neural network to optimize the pH response range of chlorophenol red. ASEAN Journal Science & Technology for Development, 20(384), pp. 253-259.

Abdullah, J.Ahmad, M.Heng, L.Y.Karuppiah, N.Sidek, H.. 2008. Evaluation of an optical phenolic biosensor signal employing artificial neural networks. Sensors and Actuators, B: Chemical.

Han, C.L.Sing, M.N.Ahmad, M.Taib, M.N. 2005. Accurate zirconium detection at visible wavelength using artificial neural network. Analytical Letters

  1. Kheiralla, A.F., Yahya, A., Zohadie, M., Ismail, W.I. 2003. Empirical models for power and energy requirements 1: Draught implements operating in Serdang sandy clay loam, Malaysia. ASEAN Journal on Science & Technology for Development, 20(3-4), pp. 334-347

Boon, N.E.Yahya, A.Kheiralla, A.F.Wee, B.S.Gew, S.K. 2005. A tractor-mounted, automated soil penetrometer-shearometer unit for mapping soil mechanical properties. Biosystems Engineering. 90 (4), PP.381-396.

  1. Kok, K.Y., Ng, I.K.2002. [No title available]. ASEAN Journal on Science and Technology for Development, 19(2), pp. 33-43.

Kok, K.Y.Ng, I.K.. 2010. Microstructural characterisation of giant magnetoresistive Co/Cu multilayers. IP Conference Proceedings, 1217, pp. 252-255.

Kok, K.Y.Ng, I.K.. 2010. Microstructural characterisation of giant magnetoresistive Co/Cu multilayers. AIP Conference Proceedings, 1217, pp. 65-71.

  1. Quadir, G.A., Ben, S.L., Seetharamu, K.N., Hassan, A.Y. 2002. Steady state finite element analysis of a single stack cold plate with heat losses. ASEAN Journal on Science and Technology for Development, 19(1), pp. 77-90.

Beh, S.L.Ooi, C.K.Quadir, G.A.Seetharamu, K.N.. 2005. teady and unsteady thermal analysis of a triple stack cold plate with heat losses. International Journal of Numerical Methods for Heat and Fluid Flow. 15 (1), PP. 96-112.

  1. Leong, C.H., Azid, I.A., Seetharamu, K.N. 2002. Thermal performance prediction of plastics ball grid array (PBGA) using artificial neural network. ASEAN Journal of Science and Technology for Development, 19(1), pp. 29-38.

Lee, H.W.Teng, Y.J.Azid, I.A.Seetharamu, K.N.. 2007. Neuro-genetic optimization of micro compact heat exchanger. International Journal of Numerical Methods for Heat and Fluid Flow, 17 (1), PP.20-33.

  1. Abdullah, M.-Z., Yau, Y.-C., Zainal Alauddin, A., Seetharamu, K.-N. 2001. Effect of Pressure on Thermal Contact Resistance for Rough Surfaces. ASEAN Journal on Science and Technology for Development, 18(2), pp. 29.

Joseph, R.Peter, J.Sunil Kumar, S.Asok Kumar, N. 2017. Effect of thermal and load cycle on thermal contact conductance across dissimilar joints at cryogenic temperature. Applied Thermal Engineering, 111, PP. 1622-1628.

Borrelli, R.Riccio, A.Tescione, D.Gardi, R.Marino, G. 2010. Numerical/experimental correlation of a plasma wind tunnel test on a UHTC-made nose cap of a reentry vehicle. Journal of Aerospace Engineering, 23 (4), pp. 309-316

Elhady, A.M. 2010. Design and analysis of a LEO micro-satellite thermal control including thermal contact conductance. IEEE Aerospace Conference Proceedings, 5446763.

  1. Chou, S.K., Chua, K.J., Mujumdar, A.S., Tan, M., Tan, S.L. 2001. Study on the osmotic pre-treatment and infrared radiation on drying kinetics and colour changes during drying of agricultural products. ASEAN Journal on Science and Technology for Development, 18(1), pp. 11-23.

  1. Abdullah, M.Z., Yau, Y.C., Alauddin, Z.A.Z., Seetharaamu, K.N. 2001. [No title available]. ASEAN Journal of Science and Technology For Development, 18, pp. 15.

Narayana, S.R.Narayan, P.K. 2014. Effect of load and interface materials on thermal contact resistance between similar and dissimilar materials. Applied Mechanics and Materials, 592-594, pp. 1493-1497.

  1. Lim, K.O., Zainal Alimuddin, Z.A., Ghulam, A.Q., Mohd Zulkifly, A. 2000. Energy potential and utilisation of plantation crops in Malaysia. ASEAN Journal on Science and Technology for Development, 17(2), pp. 1-15.

Ratnasingam, J.Ramasamy, G.Wai, L.T.Senin, A.L.Muttiah, N. 2015. The prospects of rubberwood biomass energy production in Malaysia. BioResources, 10 (2), PP. 2526-2548.

  1. Samad, S.A. 2000. Time Domain Optimal Design of Cascaded Unit Element Wave Digital Filters by Transmission Line Modelling. ASEAN Journal of Science & Technology for Development.

Samad, S.A.Hussain, A. 1999. Using the two-dimensional transmission line modelling technique to design ladder wave digital filters. Malaysian Journal of Computer Science, 12 (1), PP. 55-59.

 

  1. Dechaumphai, P., Sikkhabandit, S. 2000. Adaptive Finite Element Technique for Viscous Flow Analysis. ASEAN Journal on Science and Technology for Development, 17(1), pp. 41-58.

Paweenawat, A.Dechaumphai, P. 2006. Nodeless variables finite element method and adaptive meshing teghnique for viscous flow analysis. Journal of Mechanical Science and Technology, 20 (10), PP. 1730-1740.

  1. Chin, K.V., Hui, S.C., Foo, S. 1999. A Quality-based Dynamic Voice Recovery Mechanism for Internet Telephony System. ASEAN Journal of Science and Technology for Development, 16(2), pp. 93-110.

Wah, L.K.Heng, T.C. 2002. Adaptive bandwidth-constrained media-specific forward error correction for voice over Internet protocol. IEEE International Conference on Networks, ICON. 1033353, PP. 455-460.

  1. Sidek, H.A.A., Chow, S.P., Senin, H.B., Halim, S.A. 1998. [No title available]. ASEAN Journal of Science Technology Development, 15(1), pp. 1-13.

Aziz, S.H.A.Ahmad, H.Wahab, Z.A., (...), Shaari, A.H.Senin, H.B. 2007. Ultrasonic and thermal properties of borate and phosphate glasses containing bismuth and lead. AIP Conference Proceedings, 909, PP.197-209.

  1. Chou, S.K., Hawlader, M.N.A., Ho, J.C., Chua, K.J. 1998. An improved design of a heat pump tunnel dryer. Asean Journal on Science and Technology for Development, pp. 10-18.

  1. Chong, C.N., Idrus, A.Z. 1998. Biomass energy potential in Malaysia. Asean Journal on Science and Technology for Development, 5, pp. 15-27.

Sulaiman, S.A.Balamohan, S.Moni, M.N.Z.Atnaw, S.M.Mohamed, A.O. 2015. Feasibility study of gasification of oil palm fronds. Journal of Mechanical Engineering and Sciences, 9, PP. 1744-1757.

  1. Suphantharika, M., Varavinit, S., Shobsngob, S. 1997. Determination of optimum conditions for autolyzed yeast extract production. ASEAN Journal on Science and Technology for Development, 14(1), pp. 21-28.

  1. Verduyn, C., Niemthanorm, A., Suphantharika, M. 1997. Effect of solids, papain and salt on yield and protein content of autolyzed yeast extract. ASEAN Journal of Science and Technology Development, 14, pp. 29-40.

Verduyn, C.Suksomcheep, A.Suphantharika, M. 1999, Effect of high pressure homogenization and papain on the preparation of autolysed yeast extract. World Journal of Microbiology and Biotechnology, 15 (1), PP. 63-71.

  1. Ismail, N., Bakar, A.N. 1997. Recognition of Features from B-rep Solid Models. ASEAN Journal of Science and Technology Development, 14(2), pp. 35-49.

Tan, C.F.Kher, V.K.Ismail, N. 2013. Design of a feature recognition system for CAD/CAM integration. World Applied Sciences Journal

  1. Yusuff, R.M., Wong, O.O. 1996. Ergonomically designed chair for Malaysian VDT users. ASEAN Journal of Science and Technology Development, 13(2), pp. 49-65.

Hassan, S.N.Yusuff, R.M.Zein, R.M.Hussain, M.R.Selvan, H.K.T. 2015. Anthropometric data of Malaysian workers. New Ergonomics Perspective - Selected Papers of the 10th Pan-Pacific Conference on Ergonomics, PP. 353-360.

  1. Baharin, I.B., Hasan, M.M. 1995. Intelligent Trajectory Generation Approach for a Robot Manipulator. ASEAN Journal on Science &Technology for Development, 12(1), pp. 103-117.

Hasan, M.M. 2013. Biological 'blind-tracking' task through artificial intelligence. Proceeding - 2013 International Conference on Computer, Control, Informatics and Its Applications: "Recent Challenges in Computer, Control and Informatics", IC3INA 2013.

Hasan, Md.M. 2003. A robust real time position and force (hybrid) control of a robot manipulator in presence of uncertainties. IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems.

  1. Josson, L.M., Coronel, L.M., Mercado, B.B., (...), Lozano, A.M., Bigol, M.B. 1992. Strain improvement of aspergillus oryzae for glucoamylase production. Asean Journal on Science and Technology for Development 9(1), pp. 01-116

Juliastuti, S.R.Yanuarita, D.P.2010. Kinetic parameter of alfa-amylase and glucoamylase enzymatic reaction on the glucose yield from hydrolized processes of tapioca solid waste. 19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-72010, 10p19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7; Prague; Czech Republic; 28 August 2010 through 1 September 2010

  1. Suwanyuen, S., Chayawatana, T., Surachpakorn, Y., Tangsathikulchai, C., Tia, S. 1992. Combustion of rice hull in a fluidized bed furnace. ASEAN Journal on Science & Technology for Development 9(2), pp. 107-115

Permchart, W.Tanatvanit, S.2009. DocumentPreliminary investigation on combustion characteristics of rice husk in FBC. World Academy of Science, Engineering and TechnologyVolume 56, August 2009, Pages 183-186.

Janvijitsakul, K.Kuprianov, V.I.2008. Major gaseous and PAH emissions from a fluidized-bed combustor firing rice husk with high combustion efficiency. Fuel Processing TechnologyVolume 89, Issue 8, August 2008, Pages 777-787

Kuprianov, V.I.Permchart, W.Janvijitsakul, K.2005. Fluidized bed combustion of pre-dried Thai bagasse. Fuel Processing TechnologyVolume 86, Issue 8, 15 May 2005, Pages 849-860.

Permchart, W.Kouprianov, V.I.2004. Emission performance and combustion efficiency of a conical fluidized-bed combustor firing various biomass fuels. Bioresource TechnologyVolume 92, Issue 1, March 2004, Pages 83-91.

Permchart, W.Permchart, W.Kouprianov, V.I.2003. Emissions from a conical fluidized bed combustor firing various biomass fuels. Macro ReviewVolume 16, Issue 1, 2003, Pages 130-134.

  1. Soponronnarit, S., Chinsakolthanakorn, S. 1990. Effect of heat and water from respiration on drying rate and energy consumption. ASEAN Journal for Science and Technology for Development 7, pp. 65-83.

Tirawanichakul, Y.Prachayawarakorn, S.Varanyanond, W.Soponronnarit, S.2004.
Document Simulation and grain quality for in-store drying of paddy. Journal of Food Engineering Volume 64, Issue 4, October 2004, Pages 405-415

  1. Scott-Kemmis, D., Darling, T., Johnston, R. 1989. Innovation theory: Developments in the 1980s and policy for the 1990s. ASEAN Journal on Science and Technology for Development 6(2), pp. 1-14.

Dirsehan, T.2015. Building innovative competitive advantage in the minds of customers (  Book Chapter). Adoption of Innovation: Balancing Internal and External Stakeholders in the Marketing of Innovation1 January 2015, Pages 75-93

  1. Bird, E.C.F. 1989. The effects of a rising sea level on the coasts of Thailand. ASEAN Journal of Science & Technology for Development 16, pp. 1-13

Gupta, A.Wong, P.P.1994. PHYSICAL GEOGRAPHY IN SOUTHEAST ASIA: PAST THEMES, CURRENT STATUS AND FUTURE TRENDS. Singapore Journal of Tropical GeographyVolume 14, Issue 2, December 1994, Pages 252-264

  1. Yeoh, B.G., Idrus, A.Z., Ong, K.S. 1988, Technology research and development for environmental management - With specific reference to Malaysia. ASEAN Journal of Science Technology and Development 5(1), pp. 1-13

Foo, K.Y.Hameed, B.H.2009. Utilization of biodiesel waste as a renewable resource for activated carbon: Application to environmental problems. Renewable and Sustainable Energy ReviewsVolume 13, Issue 9, December 2009, Pages 2495-2504.

Yeoh, B.G.2005. A technical and economic analysis of heat and power generation from biomethanation of palm oil mill effluent. International Energy JournalVolume 6, Issue 1 PART 3, June 2005, Pages 315-327.

Guo, J.Lua, A.C. 2001. Kinetic study on pyrolytic process of oil-palm solid waste using two-step consecutive reaction model. Biomass and BioenergyVolume 20, Issue 3, 2001, Pages 223-233.

Guo, J.Lua, A.C. 2000 . Kinetic study on pyrolysis of extracted oil palm fiber. Isothermal and non-isothermal conditions. Journal of Thermal Analysis and CalorimetryVolume 59, Issue 3, 2000, Pages 763-774.

Lua, A.C.Guo, J. 1999. Chars pyrolyzed from oil palm wastes for activated carbon preparation. Journal of Environmental EngineeringVolume 125, Issue 1, January 1999, Pages 72-76.

Lua, A.C.Guo, J. 1998. Preparation and characterization of chars from oil palm waste. CarbonVolume 36, Issue 11, November 1998, Pages 1663-1670.

Guo, J.Lua, A.C. Characterization of chars pyrolyzed from oil palm stones for the preparation of activated carbons. Journal of Analytical and Applied PyrolysisVolume 46, Issue 2, August 1998, Pages 113-125.

  1. Soponronnarit, S.1988. Energy model of grain drying system. ASEAN Journal on Science and Technology for Development 5(2), pp. 43-68.

Atungulu, G.G.Zhong, H.Osborn, G.S.Mauromoustakos, A.Singh, C.B. 2016. Simulation and validation of on-farm in-bin drying and storage of rough rice. Applied Engineering in Agriculture.

Sarker, M.S.H.Ibrahim, M.N.Aziz, N.A.Punan, M.S. 2015. Application of simulation in determining suitable operating parameters for industrial scale fluidized bed dryer during drying of high impurity moist paddy. Journal of Stored Products Research.

Lawrence, J.Atungulu, G.G.Siebenmorgen, T.J. 2015. Modeling in-bin rice drying using natural air and controlled air drying strategies. Transactions of the ASABE.

Tirawanichakul, Y.Tasara, J.Tirawanichakul, S. 2011. Two-stage optimal fixed-bed drying for natural rubber producing STR20 block rubber.  Source of the Document2011 IEEE Colloquium on Humanities, Science and Engineering, CHUSER 2011.

Li, Y.Li, H.F.Dai, Y.J., (...), Odinez, I.G.Wang, R.Z.. 2011. Experimental investigation on a solar assisted heat pump in-store drying system. Applied Thermal Engineering.

Tirawanichakul, Y.Prachayawarakorn, S.Varanyanond, W.Soponronnarit, S. 2004. Simulation and grain quality for in-store drying of paddy. Journal of Food Engineering.

Tirawanichakul, Y.Prachayawarakorn, S.Tungtrakul, P.Chaiwatpongskorn, W.Soponronnarit, S.. 2003. Experiments on in-store paddy drying under tropical climate: Simulation and product quality. Drying Technology.

Madhiyanon, T.Soponronnarit, S.Tia, W. 2002. A mathematical model for continuous drying of grains in a spouted bed dryer. Drying Technology.

Soponronnarit, S.Nathakaranakule, A.Noosuk, P.Yoovidhya, T.. Strategies for papaya glacé drying in tunnel. Drying Technology

Mumba, J. 1996. Design and development of a solar grain dryer incorporating photovoltaic powered air circulation. Energy Conversion and Management.

  1. Arbain, D., Sargent, M.V. 1987. A preliminary investigation of the alkaloids of Phoebe lanceolata. ASEAN Journal of Science and Technology for Development 4, pp. 41-42

Arbain, D. 2012. Inventory, constituents and conservation of biologically important Sumatran plants. Natural Product CommunicationsVolume 7, Issue 6, 2012, Pages 799-806.